On Mar 30, 2012, at 2:08 PM, Viesturs Lācis wrote: > 2012/3/30 Jeshua Lacock <jes...@3dtopo.com>: >> >> On Mar 30, 2012, at 1:37 PM, Viesturs Lācis wrote: >> >>> >>> I guess that one of these c090, c080, c070, c060 or c020 is the port >>> address, which should be specified in the HAL file (sorry, I am not >>> that smart to know, which one exactly; trial-and-error method is my >>> best friend in such cases). >>> Other than that - treat it as usual parallel port. >> >> So how would that be specified? 0c090? The default is 0x378. >> > > Trial-and-error method :)) > Honestly I do not know. I guess it could be 0xc090, but I would > encourage You to try those remaining too, if this does not work. If > none of them work with 0x in front, then I am wrong. As simple as that
Thanks! I just wasn't sure to put a 0x in front or what. I just put in 0xc050 and it works! Best, Jeshua Lacock Founder/Engineer 3DTOPO Incorporated <http://3DTOPO.com> Phone: 208.462.4171 ------------------------------------------------------------------------------ This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users