On Thu, 12 Apr 2012, Erik Friesen wrote:
> Date: Thu, 12 Apr 2012 16:38:54 -0400
> From: Erik Friesen <[email protected]>
> Reply-To: "Enhanced Machine Controller (EMC)"
> <[email protected]>
> To: "Enhanced Machine Controller (EMC)" <[email protected]>
> Subject: Re: [Emc-users] Understanding the 5i25
>
> I have it together and running now. The 5i25 card + gecko drives have
> brought these steppers to life compared to the old probotix drives. I am
> now running them at 4 amps parallel. Before I had to limit my accel to
> under 20, and max speed at 100ipm.
>
> Thanks for the input.
>
> So, for future readers, here is a list of my personal gotchas -
>
> Each stepgen takes control of 3 specific pins, which are listed here in
> prob_rfx2.pin. <http://www.mesanet.com/software/parallel/5i25.zip>
There are only 2 dedicated pins per stepgen, STEP and DIR
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
------------------------------------------------------------------------------
For Developers, A Lot Can Happen In A Second.
Boundary is the first to Know...and Tell You.
Monitor Your Applications in Ultra-Fine Resolution. Try it FREE!
http://p.sf.net/sfu/Boundary-d2dvs2
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
