Thanks for the correction. On Thu, Apr 12, 2012 at 5:00 PM, Peter C. Wallace <[email protected]> wrote:
> On Thu, 12 Apr 2012, Erik Friesen wrote: > > > Date: Thu, 12 Apr 2012 16:38:54 -0400 > > From: Erik Friesen <[email protected]> > > Reply-To: "Enhanced Machine Controller (EMC)" > > <[email protected]> > > To: "Enhanced Machine Controller (EMC)" <[email protected] > > > > Subject: Re: [Emc-users] Understanding the 5i25 > > > > I have it together and running now. The 5i25 card + gecko drives have > > brought these steppers to life compared to the old probotix drives. I am > > now running them at 4 amps parallel. Before I had to limit my accel to > > under 20, and max speed at 100ipm. > > > > Thanks for the input. > > > > So, for future readers, here is a list of my personal gotchas - > > > > Each stepgen takes control of 3 specific pins, which are listed here in > > prob_rfx2.pin. <http://www.mesanet.com/software/parallel/5i25.zip> > > There are only 2 dedicated pins per stepgen, STEP and DIR > > Mesa Electronics > > (\__/) > (='.'=) This is Bunny. Copy and paste bunny into your > (")_(") signature to help him gain world domination. > > > > ------------------------------------------------------------------------------ > For Developers, A Lot Can Happen In A Second. > Boundary is the first to Know...and Tell You. > Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! > http://p.sf.net/sfu/Boundary-d2dvs2 > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
