On Sat, 14 Apr 2012 14:45:40 -0700, you wrote: >What comes to mind from my first test is that the Roswill may never work >with the G540 without an external pull-up. These 9815 based cards are by >far the most popular, so either Mach3 people are not using PCI cards >with the G540, or Mach3 is doing something other than setting EPP mode?
Most, if not all, Mach users use a breakout board, not recommended connecting direct to parallel port. However the G540 is supposed to have it's own breakout board built in and I've seen no reports of it not working with windows/Mach combination. I would guess that plenty of people are using it with 9815 based PCI cards too. Don't know much else about it though, never used one - too expensive - it's a full 150 dollars more over here than in the USA!! Steve Blackmore -- ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
