Hi Joseph;

> John, I can tell you for sure that the parts end up being much
> stronger than you might at first guess from being printed hollow.
> That isn't to say that they are indestructable -- but I was skeptical
> at first, too.  The application you mentioned is actually perfect for
> 3D printing -- the various one-off'ish bits and bobs that you would
> rather not spend much time tooling up to make.

I absolutely agree with the whole issue of 3D printing, so my personal issues 
are more to deal with my specific application than with the process. 

Just an FYI; I make 1:16 and 1:8 scale steam locomotives; soft plumbers solder 
does not hold up well on most parts of the locomotive. I've had issues, and 
have seen some messes when people used soft solder for detail work. For sealing 
water containers (locomotive tenders, etc) soft solder is ok. 

These things have coal fires that glow orange when running, and the water in 
them is at about 170 degrees c.  and do indeed get hot. 

Just fyi; right now my silver soldering of a copper boiler outside (hope to 
complete 2 this summer) is with Easy flo 45; it melts at 1125 degrees f; 605 
degrees c. In shade, the copper sheet glows cherry red/orange, and brass will 
melt not much higher than that - I have melted brass components by accident 
before. (whoops…)

I think we are all on the same side of the fence here, just waiting for 
technology to catch up to all of our needs/price points.

JohnS.









------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to