ok so the off center was a machine location and not a concern with the program . i still presume x and y 0 were the center of the part correct? you really have a lot of code here without comments . it looks like it is the code fro the inside and outside profile is the outside symmetrical? i seen no g41 or 42 so there is no cutter comp it is programmed to the toolpath. you need to measure and see if the error is in the inside or the outside. what cad package did you use to draw the part ? post the drawing in a link and i will see if i can find errors . usually cam will not cause what you have i think it may be drawing error, or cammanipulation error . i no longer have cam bam installed that pc got blown up in a power crisis
PRIVACY NOTICE: Warning - any person and/or institution and/or Agent and/or Agency of any governmental structure including but not limited to the United States Federal Government also using or monitoring/using this website or any of its associated websites, you do NOT have my permission to utilize any of my profile information nor any of the content contained herein including, but not limited to my photos, and/or the comments made about my photos or any other "picture" art posted on my profile. You are hereby notified that you are strictly prohibited from disclosing, copying, distributing, disseminating, or taking any other action against me with regard to this profile and the contents herein. The foregoing prohibitions also apply to your employee , agent , student or any personnel under your direction or control. The contents of this profile are private and legally privileged and confidential information, and the violation of my personal privacy is punishable by law. UCC 1-103 1-308 ALL RIGHTS RESERVED WITHOUT PREJUDICES jeremy youngs On Sun, Jun 16, 2013 at 8:53 PM, John Alexander Stewart <ivatt...@gmail.com>wrote: > Jeremy; > > I used a centre drill to drill the hole. After the machining, I moved the > table back to (0,0) and put the end mill down it until a bit of aluminium > came out, and it seems to be centred still ok. > > Thanks - John. > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by Windows: > > Build for Windows Store. > > http://p.sf.net/sfu/windows-dev2dev > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
