On 29 July 2013 02:10, Alexander Newman <anew...@optusnet.com.au> wrote:
> 3-axis hal file = <http://pastebin.com/7TaM60VR> That looks like it should work. Have you tried swapping connections to be sure that the Y motor and drive work properly? (Don't change any connections with the drive powered up though). Your axis limits look very strange. -100 to +100 on X, -20 to +20 on Y and -4 to 0.001 on Z? 4mm Z travel seems unusually small. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ See everything from the browser to the database with AppDynamics Get end-to-end visibility with application monitoring from AppDynamics Isolate bottlenecks and diagnose root cause in seconds. Start your free trial of AppDynamics Pro today! http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users