> And one more question - I recall that somebody defined the camera as "tool 99" to treat the offset along x and y between camera and spindle. > I did measure these offsets, but I do not understand, what to do next. I edited tooltable, added tool, also gave it number 99, entered offsets > along x, y, z and diameter values set to 0,1 just to have something. How do I apply them? By running "m6 t99" and/or "g43 t99"? I tried the > first and it froze for a while and did not execute any mdi commands. I would appreciate, if those users, that have did this, could share their experience.
I use... G43 H99 Note the H, not the T. ------------------------------------------------------------------------------ Introducing Performance Central, a new site from SourceForge and AppDynamics. Performance Central is your source for news, insights, analysis and resources for efficient Application Performance Management. Visit us today! http://pubads.g.doubleclick.net/gampad/clk?id=48897511&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
