On Sun, 1 Dec 2013, Leonardo Marsaglia wrote: > Date: Sun, 1 Dec 2013 22:38:48 -0200 > From: Leonardo Marsaglia <leonardomarsagli...@gmail.com> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Subject: Re: [Emc-users] Mesa 5i25 + 7i77 basic configuration > > Excellent. Tomorrow I'm going to try to move the motor with the VFD and the > 7i77. > > By the way, the ENA0+ and ENA0- signals turn on/off whenever LinuxCNC asks > for the motor to move right? Do I have to link these pins? Or they are > already linked because of the firmware installed? >
The enable signals are controlled by hal pins. As described in the manual, enables 0 through 4 are controlled by a logical single enable which for most configuration will be: hm2_5i25.0.7i77.0.1.analogena it is suggested that this be linked to motions axis 0 amp enable pin > Thanks! > > > > > 2013/12/1 Peter C. Wallace <p...@mesanet.com> > >> On Sun, 1 Dec 2013, Chris Morley wrote: >> >>> Date: Sun, 1 Dec 2013 04:30:07 +0000 >>> From: Chris Morley <chrisinnana...@hotmail.com> >>> Reply-To: "Enhanced Machine Controller (EMC)" >>> <emc-users@lists.sourceforge.net> >>> To: EMC <emc-users@lists.sourceforge.net> >>> Subject: Re: [Emc-users] Mesa 5i25 + 7i77 basic configuration >>> >>> >>> >>>> Date: Sat, 30 Nov 2013 22:35:39 -0200 >>>> From: leonardomarsagli...@gmail.com >>>> To: emc-users@lists.sourceforge.net >>>> Subject: Re: [Emc-users] Mesa 5i25 + 7i77 basic configuration >> SNIP----------------------------------------------------------------> >> >>> The 5i25 supports hardware steppers but you would need to reflash the >> 5i25 >>> for firmware that has stepgens in it. >>> If you want PWM signals then you don't want the 7i77. Not sure if Peter >> has >>> PWM gen firmware for the 5i25 - I'm sure he will answer. >>> >>> Chris M >> >> >> With one exception (the resolver interface), all Hostmot2 modules are >> avalilable on all FPGA cards. Thats is, other than the top level interface >> (PCI,EPP,SPI,Ethernet,Serial) the firmware is identical for all cards. The >> 5I25/6I25 configurations tend to use sserial external interfaces to save >> pins >> since they only have 17 pins available per connector. >> >> There are stepgen and PWM configurations for the 5I25/6I25 (see >> 7I85SPx2.pin), >> and almost any combination of available modules is available (with the >> limit >> of 34 total pins of course) >> >> >> Peter Wallace >> Mesa Electronics >> >> >> >> ------------------------------------------------------------------------------ >> Rapidly troubleshoot problems before they affect your business. Most IT >> organizations don't have a clear picture of how application performance >> affects their revenue. With AppDynamics, you get 100% visibility into your >> Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics >> Pro! >> http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > > > -- > *Leonardo Marsaglia*. > ------------------------------------------------------------------------------ > Rapidly troubleshoot problems before they affect your business. Most IT > organizations don't have a clear picture of how application performance > affects their revenue. With AppDynamics, you get 100% visibility into your > Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! > http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users