I have a small Davinci CNC that I bought years ago for prototyping, but
never used as my larger CNC gets all the work.
On Page 47 and 48 of the manual in the link below, it describes the
Gcode for Arcs.
My machine cuts arcs in the X-Y plane but will not move e.g. in an arc
whenever the Z-axis is involved.
I need an arc in the Z-axis as I want to cut a concave cavity along the
length of a block.
I tried everything according to the manual, but it refuses to move in an
arc in the X-Z or Y-Z axis.
Any clue why it does not work with this machine?
If the link below on Pages 47 and 48 are examples which are trivial to
follow. All these examples work but they are in the XY axis only.
If the following link wraps or is unclickable just google
Stepper *DaVinci G*-*Code* Interface Manual
<http://www.google.com/url?q=http://support.technocnc.com/support/0049_GCODE%2520STEPPER%2520DAVINCI.pdf&sa=U&ei=yGyyUo6bEZD7kQfL8oG4Dg&ved=0CB8QFjAA&usg=AFQjCNG9KI0a2ruQooY0rq5yVxaqd-XoSw>
"http://www.google.com/url?q=http://support.technocnc.com/support/0049_GCODE%2520STEPPER%2520DAVINCI.pdf&sa=U&ei=yGyyUo6bEZD7kQfL8oG4Dg&ved=0CB8QFjAA&usg=AFQjCNG9KI0a2ruQooY0rq5yVxaqd-XoSw";
------------------------------------------------------------------------------
Rapidly troubleshoot problems before they affect your business. Most IT
organizations don't have a clear picture of how application performance
affects their revenue. With AppDynamics, you get 100% visibility into your
Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro!
http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
