On 2014-04-24 14:56, andy pugh wrote: > On 24 April 2014 13:43, Gene Heskett <ghesk...@wdtv.com> wrote: > >> Thanks. Unfortunately, the butt end of those holders, with one 12mm >> exception on page 65, are all too big for my QC holders. > They are also rather expensive. > However, you have a milling machine. And I have the G-code to carve > the socket in a suitable piece of material. > >> I also note that 99% of the inserts are through coolant, something I am not >> equipt to handle. > It's a nice feature, and the coolant feeds in from the end of the > holder thorugh a drilling. > However, I use the Horn boring tools quite extensively and actually > have no coolant at all on my lathe. (I need you to make that round > toit press).
Andy, do you use any other of their tools at all? I had a look at then today and we can get some locally. My lathe is getting along and I will need to decide on tools soon before I manufacture the tool changer. -- Regards /Groete Marius D. Liebenberg +27 82 698 3251 +27 12 743 6064 QQ 1767394877 ------------------------------------------------------------------------------ Start Your Social Network Today - Download eXo Platform Build your Enterprise Intranet with eXo Platform Software Java Based Open Source Intranet - Social, Extensible, Cloud Ready Get Started Now And Turn Your Intranet Into A Collaboration Platform http://p.sf.net/sfu/ExoPlatform _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users