I'm using cameras and microscopes with Linuxcnc for vision based feature and defect detection. I'll try to update Camview and Camunits to easily work with Linuxcnc for edge detection, vision based homing, center finding, etc etc.
These were taken with a Logitech C270 ~$30-40 permanently mounted offset the spindle/nozzle. http://www.newegg.com/Product/Product.aspx?Item=N82E16826104648 1" Field of View http://imagebin.org/308971 PCB Traces http://imagebin.org/308970 I have one of those pencil 200X Portable USB Digital Microscopes but they aren't 5MP as advertised. They are only 640 x 480. http://www.ebay.com/itm/200X-Portable-USB-Digital-5MP-4-LED-Microscope-Endoscope-Camera-with-Tripod-/251414807545 The images aren't even that great for VGA res. http://imagebin.org/308973 taken 1 inch from object to lens. On 05/03/2014 11:08 PM, Jon Elson wrote: > On 05/03/2014 07:09 PM, Steve Blackmore wrote: >> Jon - Mine's a Supereyes B005 - I'm very impressed with >> it. Manual focus range is excellent. They list it as >> Magnification = 1/10-200X It will focus with the camera >> touching an object or as far away as you like. Easy to >> mount too as it's slim tube. Also has light ring which you >> can adjust intensity on via a dial in the cable from off >> to very bright. Best of all was it was inexpensive, listed >> at $27.99 on Amazon but are available cheaper if you look >> around. > Yes, that sounds quite similar to the unit I just bought, > I'll see > how well it works when i get it. > > Thanks, > > Jon > > ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
