Hi after i home machine i can jog any axis. when i input M52 -- all axis stop moving - can not jog any axis. when i input M52 P0 again i can jog all axis .
now machine behave some differently. that what i have now On Tue, Jul 22, 2014 at 11:51 AM, Stuart Stevenson <stus...@gmail.com> wrote: > Aram, > Take a look at this link. > > > http://linuxcnc.org/docs/html/gcode/m-code.html#sec:M52-Adaptive-Feed-Control > > If the pin *motion.adaptive-feed *is zero then feed hold is on. You must > connect something to *motion.adaptive-feed *or the machine will not move. > Try m52 p0 to see if the machine will move. > thanks > Stuart > > > On Tue, Jul 22, 2014 at 1:13 PM, a k <pccncmach...@gmail.com> wrote: > > > Hi > > what i have-- machine working. can home machine. move away from home > switch > > by jog negative. can program with mdi -g1 g91 y-2 f4. --- and it move > the > > axis. > > all good > > when i introduce m52 p1 axis stop moving. simple program trough mdi stop > > working-moving axis. i can not jog any axis. need close emc2 start again > > and than i can jog and program axis. > > > > i use m52 p0 and it did not help. > > i did post few e-mail back ini and hal > > any idea where is problem? > > > > thanks > > aram > > > > > > On Mon, Jul 21, 2014 at 4:46 AM, andy pugh <bodge...@gmail.com> wrote: > > > > > On 21 July 2014 06:59, a k <pccncmach...@gmail.com> wrote: > > > > > > > to stop m52 p1 is m53 > > > > > > M53 is Feed Stop Control, it enables the feed-hold pin, it doesn't > > > disable adaptive feed. > > > > > > > > > http://www.linuxcnc.org/docs/html/gcode/m-code.html#sec:M52-Adaptive-Feed-Control > > > M52 P0 turns off adaptive feed. > > > > > > -- > > > atp > > > If you can't fix it, you don't own it. > > > http://www.ifixit.com/Manifesto > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > Want fast and easy access to all the code in your enterprise? Index and > > > search up to 200,000 lines of code with a free copy of Black Duck > > > Code Sight - the same software that powers the world's largest code > > > search on Ohloh, the Black Duck Open Hub! Try it now. > > > http://p.sf.net/sfu/bds > > > _______________________________________________ > > > Emc-users mailing list > > > Emc-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > ------------------------------------------------------------------------------ > > Want fast and easy access to all the code in your enterprise? Index and > > search up to 200,000 lines of code with a free copy of Black Duck > > Code Sight - the same software that powers the world's largest code > > search on Ohloh, the Black Duck Open Hub! Try it now. > > http://p.sf.net/sfu/bds > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > -- > Addressee is the intended audience. > If you are not the addressee then my consent is not given for you to read > this email furthermore it is my wish you would close this without saving or > reading, and cease and desist from saving or opening my private > correspondence. > Thank you for honoring my wish. > > ------------------------------------------------------------------------------ > Want fast and easy access to all the code in your enterprise? Index and > search up to 200,000 lines of code with a free copy of Black Duck > Code Sight - the same software that powers the world's largest code > search on Ohloh, the Black Duck Open Hub! Try it now. > http://p.sf.net/sfu/bds > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
