Hi from hal 1. setp scale.0.gain 0.00034483 2. 3. setp scale.0.offset -0.4172 4. 5. net scaled-percent scale.0.out => motion.adaptive-feed
i did replace -0.4172 with 0.4172 Now i can home machine. enter m52 and jog machine but i can not change feed with my potentiometer 0+5 V DC On Tue, Jul 22, 2014 at 2:01 PM, a k <pccncmach...@gmail.com> wrote: > Hi > after i home machine i can jog any axis. > when i input M52 -- all axis stop moving - can not jog any axis. > when i input M52 P0 again i can jog all axis . > > now machine behave some differently. that what i have now > > > On Tue, Jul 22, 2014 at 11:51 AM, Stuart Stevenson <stus...@gmail.com> > wrote: > >> Aram, >> Take a look at this link. >> >> >> http://linuxcnc.org/docs/html/gcode/m-code.html#sec:M52-Adaptive-Feed-Control >> >> If the pin *motion.adaptive-feed *is zero then feed hold is on. You must >> connect something to *motion.adaptive-feed *or the machine will not move. >> Try m52 p0 to see if the machine will move. >> thanks >> Stuart >> >> >> On Tue, Jul 22, 2014 at 1:13 PM, a k <pccncmach...@gmail.com> wrote: >> >> > Hi >> > what i have-- machine working. can home machine. move away from home >> switch >> > by jog negative. can program with mdi -g1 g91 y-2 f4. --- and it move >> the >> > axis. >> > all good >> > when i introduce m52 p1 axis stop moving. simple program trough mdi stop >> > working-moving axis. i can not jog any axis. need close emc2 start again >> > and than i can jog and program axis. >> > >> > i use m52 p0 and it did not help. >> > i did post few e-mail back ini and hal >> > any idea where is problem? >> > >> > thanks >> > aram >> > >> > >> > On Mon, Jul 21, 2014 at 4:46 AM, andy pugh <bodge...@gmail.com> wrote: >> > >> > > On 21 July 2014 06:59, a k <pccncmach...@gmail.com> wrote: >> > > >> > > > to stop m52 p1 is m53 >> > > >> > > M53 is Feed Stop Control, it enables the feed-hold pin, it doesn't >> > > disable adaptive feed. >> > > >> > > >> > >> http://www.linuxcnc.org/docs/html/gcode/m-code.html#sec:M52-Adaptive-Feed-Control >> > > M52 P0 turns off adaptive feed. >> > > >> > > -- >> > > atp >> > > If you can't fix it, you don't own it. >> > > http://www.ifixit.com/Manifesto >> > > >> > > >> > > >> > >> ------------------------------------------------------------------------------ >> > > Want fast and easy access to all the code in your enterprise? Index >> and >> > > search up to 200,000 lines of code with a free copy of Black Duck >> > > Code Sight - the same software that powers the world's largest code >> > > search on Ohloh, the Black Duck Open Hub! Try it now. >> > > http://p.sf.net/sfu/bds >> > > _______________________________________________ >> > > Emc-users mailing list >> > > Emc-users@lists.sourceforge.net >> > > https://lists.sourceforge.net/lists/listinfo/emc-users >> > > >> > >> > >> ------------------------------------------------------------------------------ >> > Want fast and easy access to all the code in your enterprise? Index and >> > search up to 200,000 lines of code with a free copy of Black Duck >> > Code Sight - the same software that powers the world's largest code >> > search on Ohloh, the Black Duck Open Hub! Try it now. >> > http://p.sf.net/sfu/bds >> > _______________________________________________ >> > Emc-users mailing list >> > Emc-users@lists.sourceforge.net >> > https://lists.sourceforge.net/lists/listinfo/emc-users >> > >> >> >> >> -- >> Addressee is the intended audience. >> If you are not the addressee then my consent is not given for you to read >> this email furthermore it is my wish you would close this without saving >> or >> reading, and cease and desist from saving or opening my private >> correspondence. >> Thank you for honoring my wish. >> >> ------------------------------------------------------------------------------ >> Want fast and easy access to all the code in your enterprise? Index and >> search up to 200,000 lines of code with a free copy of Black Duck >> Code Sight - the same software that powers the world's largest code >> search on Ohloh, the Black Duck Open Hub! Try it now. >> http://p.sf.net/sfu/bds >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
