On 17 September 2014 15:50, <p...@wpnet.us> wrote: > The notes say the enable output is hard linked with the enable for the analog > output.
Ah, so it is. I will have to think more about this when I am not meant to be in an audio meeting :-) > > Setting the signs of the search and latch velocities just causes the axis to > locate the home switch in the correct direction, incorrectly set that as zero > and then search for the positive home location in vain as it runs into > overtravel. How do I tell it that the home switch location is not zero, it is > actually 18 or whatever? Don't fight it, let all the way out be 0, and all the way in be -18. You won't notice once you have touched-off your first tool to the diameter. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
