Picture here: http://gympiemodelflyers.wordpress.com/articles/brushless-motors/
------Original Mail------ From: "Dave Caroline" <dave.thearchiv...@gmail.com> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Sent: Fri, 19 Sep 2014 17:53:53 +0100 Subject: Re: [Emc-users] brushless motor coil winder I do have one relevant picture already though, this shows they are wound before placing on the armature and field for tis particular design http://www.collection.archivist.info/archive/Lucas/PS/PA11/ps1636.jpg Dave On 19/09/2014, Dave Caroline <dave.thearchiv...@gmail.com> wrote: > Thinking of thick wire, I do have some as yet unscanned pictures of > (Lucas) starter motor winding machines. > > Dave Caroline > > On 19/09/2014, Kirk Wallace <kwall...@wallacecompany.com> wrote: >> On 09/19/2014 09:11 AM, Dave Caroline wrote: >>> I dont think it is much worse than any other, you just join the groups >>> of coils together differently. >>> >>> Often the coils are wound off the rotor/stator and then mounted and >>> varnished to keep steady. >>> >>> Reverse engineer (unwind) one to see how they did it. >>> >>> >>> Dave Caroline >>> >>> On 19/09/2014, David Armstrong <cncbas...@gmail.com> wrote: >>>> Guys, >>>> iv'e been asked to come up with a coil winder for rc brushless motors >>>> has anyone done such a winder , specific to rc brushless ,as these are >>>> 3 >>>> phases >>>> i fear it could get complicated >>>> >>>> Dave >> >> The RC motors I'm familiar with use a few turns of very thick wire and >> would be a bear to wind mechanically. There may be a way to wind a coil >> off the core then install it to the stator leg, but this not ideal. >> Maybe form C shapes and weld them into a coil after they are installed? >> >> >> -- >> Kirk Wallace >> http://www.wallacecompany.com/machine_shop/ >> http://www.wallacecompany.com/E45/ >> >> ------------------------------------------------------------------------------ >> Slashdot TV. Video for Nerds. Stuff that Matters. >> http://pubads.g.doubleclick.net/gampad/clk?id=160591471&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that Matters. http://pubads.g.doubleclick.net/gampad/clk?id=160591471&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that Matters. http://pubads.g.doubleclick.net/gampad/clk?id=160591471&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
