Well, that shoots the whole thing in the ass then, the MB doesn't have a PCI slot, and no it doesn't see/show any nic when booted under the right rt kernel.
Rick On 4/8/2015 1:15 PM, sam sokolik wrote: > when you boot the -rt kernel - does it see the nic then? > > ip show > > sam > > On 4/8/2015 12:10 PM, Rick Lair wrote: >> And I looked in my bios settings, I don't even see where to turn off the >> ethernet port. >> >> >> >> On 4/8/2015 12:18 PM, Peter C. Wallace wrote: >>> On Wed, 8 Apr 2015, sam sokolik wrote: >>> >>>> Date: Wed, 08 Apr 2015 11:12:25 -0500 >>>> From: sam sokolik <sa...@empirescreen.com> >>>> Reply-To: "Enhanced Machine Controller (EMC)" >>>> <emc-users@lists.sourceforge.net> >>>> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> >>>> Subject: Re: [Emc-users] 7i80 Setup ( Was PNCConf setup) >>>> >>>> That all looks correct.. Make sure you pick the right kernel at boot >>>> time from grub. >>>> >>>> (or edit grub so it always picks the rt kernel) >>>> >>>> sam >>>> >>>>> sudo apt-get install linux-image-3.2.0-4-rt-686-pae >>> Sorry I missed that, so the preemt-rt kernel should be installed >>> I thought that the latest installed kernel was automatically >>> selected as the default boot choice but that does not appear to be the case >>> >>> Did you try enabling the Ethernet in you motherboards BIOS? >>> >>> What Motherboard do you have (to determin what Ethernet hardware is on >>> board) >>> >>> >>> ------------------------------------------------------------------------------ >>> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT >>> Develop your own process in accordance with the BPMN 2 standard >>> Learn Process modeling best practices with Bonita BPM through live exercises >>> http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ >>> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF >>> _______________________________________________ >>> Emc-users mailing list >>> Emc-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ > BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT > Develop your own process in accordance with the BPMN 2 standard > Learn Process modeling best practices with Bonita BPM through live exercises > http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ > source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users -- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com ------------------------------------------------------------------------------ BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT Develop your own process in accordance with the BPMN 2 standard Learn Process modeling best practices with Bonita BPM through live exercises http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
