The TP Link NIC showed up today, put the original MB back in, installed the NIC, and am communicating with the 7i80 using the default IP address. As soon as I go thru the motions updating the IP address, I run into trouble,
From the home directory, I run "mesaflash --device 7i80 --set ip=10.10.10.10" and it comes back with "Board IP Updated Successfully, cycle board power....." so I go back, unplug the 5v plug on the card, move the W2 jumper to the up position, plug the power back in, go back to the control and run "mesaflash --device 7i80 --addr=10.10.10.10" and it comes back "No 7i80 board found" Any Thoughts? -- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com ------------------------------------------------------------------------------ BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT Develop your own process in accordance with the BPMN 2 standard Learn Process modeling best practices with Bonita BPM through live exercises http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
