On Mon, 13 Apr 2015, Rick Lair wrote: > Date: Mon, 13 Apr 2015 13:41:43 -0400 > From: Rick Lair <r...@superiorroll.com> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Subject: Re: [Emc-users] 7i80 Setup ( Was PNCConf setup) > > The TP Link NIC showed up today, put the original MB back in, installed > the NIC, and am communicating with the 7i80 using the default IP > address. As soon as I go thru the motions updating the IP address, I run > into trouble, > > From the home directory, I run "mesaflash --device 7i80 --set > ip=10.10.10.10" and it comes back with "Board IP Updated Successfully, > cycle board power....." so I go back, unplug the 5v plug on the card, > move the W2 jumper to the up position, plug the power back in, go back > to the control and run "mesaflash --device 7i80 --addr=10.10.10.10" and > it comes back "No 7i80 board found" > > Any Thoughts? >
You need to set up your local (RT) Ethernet port to have 10.10.10.10 in its range ( suggested host address is 10.10.10.1 with netmask 255.255.255.0) > > -- > > Thanks > > > Rick Lair > Superior Roll & Turning LLC > 399 East Center Street > Petersburg MI, 49270 > PH: 734-279-1831 > FAX: 734-279-1166 > www.superiorroll.com > > > ------------------------------------------------------------------------------ > BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT > Develop your own process in accordance with the BPMN 2 standard > Learn Process modeling best practices with Bonita BPM through live exercises > http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ > source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT Develop your own process in accordance with the BPMN 2 standard Learn Process modeling best practices with Bonita BPM through live exercises http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
