Use mesaflash --device 7i80 --addr 10.10.10.10 --readhmid >> readhmid.txt the >> if you want to send it here
------ Original Message ------ From: r...@superiorroll.com To: "Marius Liebenberg" <mar...@mastercut.co.za>; "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Sent: 2015-04-14 15:49:21 Subject: RE: [Emc-users] 7i80 Setup ( Was PNCConf setup) >What command could I run to see which firmware is loaded to the 7i80? > >>-------- Original Message -------- >>Subject: Re: [Emc-users] 7i80 Setup ( Was PNCConf setup) >>From: "Marius Liebenberg" <mar...@mastercut.co.za> >>Date: Tue, April 14, 2015 8:48 am >>To: "Enhanced Machine Controller (EMC)" >><emc-users@lists.sourceforge.net> >> >> >> >>------ Original Message ------ >>From: "andy pugh" <bodge...@gmail.com> >>To: "Marius Liebenberg" <mar...@mastercut.co.za>; "Enhanced Machine >>Controller (EMC)" <emc-users@lists.sourceforge.net> >>Sent: 2015-04-14 14:42:57 >>Subject: Re: [Emc-users] 7i80 Setup ( Was PNCConf setup) >> >> >On 14 April 2015 at 13:27, Marius Liebenberg <mar...@mastercut.co.za> >> >wrote: >> >> It depends on what daughter cards are connected and if you use a >> >>sserial >> >> expansion card. As far as I know the standard firmware that it >>comes >> >> with is good enough for most configurations but I had to load >> >>something >> >> else due to the fact that I fitted a 7i44 and my firmware was old. >> > >> >That rather depends on what "standard" firmware you have. >> > >> >From what Rick says later it looks like "rmsvss6_8.bit" >> > >>True, I was referring to the base firmware that the unit comes with. >>There is a long list of possible configurations under the firmware >>directory to match every possible card. The configuration firmware is >>loaded at runtime. >> >> >That does appear to have PWM modules, on pins 11 to 23 of the first >> >connector. >> >http://git.linuxcnc.org/gitweb?p=hostmot2-firmware.git;a=blob;f=PIN_RMSVSS6_8_72.vhd;h=833d718d316c690eaaf5bb3bfe6ec84bcc56ef89;hb=HEAD >> > >> > >> >-- >> >atp >> >If you can't fix it, you don't own it. >> >http://www.ifixit.com/Manifesto >> >> >>------------------------------------------------------------------------------ >>BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT >>Develop your own process in accordance with the BPMN 2 standard >>Learn Process modeling best practices with Bonita BPM through live >>exercises >>http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- >>event?utm_ >>source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF >>_______________________________________________ >>Emc-users mailing list >>Emc-users@lists.sourceforge.net >>https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT Develop your own process in accordance with the BPMN 2 standard Learn Process modeling best practices with Bonita BPM through live exercises http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
