Peter sent me this awhile back, freeby.mesanet.com/7i80hd_16_rmesvss6_6.bit
And I loaded that the other day, and it didn't see them then. I moved the jumper yesterday to boot from the secondary flash memory, thinking maybe I fouled that up by chance, then moved it back to the default position. I will go load that firmware again, and see what happens. On 4/14/2015 8:48 AM, Marius Liebenberg wrote: > > ------ Original Message ------ > From: "andy pugh" <bodge...@gmail.com> > To: "Marius Liebenberg" <mar...@mastercut.co.za>; "Enhanced Machine > Controller (EMC)" <emc-users@lists.sourceforge.net> > Sent: 2015-04-14 14:42:57 > Subject: Re: [Emc-users] 7i80 Setup ( Was PNCConf setup) > >> On 14 April 2015 at 13:27, Marius Liebenberg <mar...@mastercut.co.za> >> wrote: >>> It depends on what daughter cards are connected and if you use a >>> sserial >>> expansion card. As far as I know the standard firmware that it comes >>> with is good enough for most configurations but I had to load >>> something >>> else due to the fact that I fitted a 7i44 and my firmware was old. >> That rather depends on what "standard" firmware you have. >> > >From what Rick says later it looks like "rmsvss6_8.bit" > True, I was referring to the base firmware that the unit comes with. > There is a long list of possible configurations under the firmware > directory to match every possible card. The configuration firmware is > loaded at runtime. > >> That does appear to have PWM modules, on pins 11 to 23 of the first >> connector. >> http://git.linuxcnc.org/gitweb?p=hostmot2-firmware.git;a=blob;f=PIN_RMSVSS6_8_72.vhd;h=833d718d316c690eaaf5bb3bfe6ec84bcc56ef89;hb=HEAD >> >> >> -- >> atp >> If you can't fix it, you don't own it. >> http://www.ifixit.com/Manifesto > > ------------------------------------------------------------------------------ > BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT > Develop your own process in accordance with the BPMN 2 standard > Learn Process modeling best practices with Bonita BPM through live exercises > http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ > source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users -- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com ------------------------------------------------------------------------------ BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT Develop your own process in accordance with the BPMN 2 standard Learn Process modeling best practices with Bonita BPM through live exercises http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
