On Tuesday 01 December 2015 12:19:01 Todd Zuercher wrote: > I think you'll find that most of the noise from a shop-vac doesn't > come out of the exhaust. You'll probably need to put the whole motor > in an enclosure to quiet it down significantly. > After todays run, I think I have to agree. I rigged up the interface so its controlled by the flood button or M8/M9, but I had to go slice off a fresh piece of ebony off the new piece and made it about 30 thou thicker because the last batch was a bit thin. In the process of getting the code adjusted for the thicker materiel, I wound up with the cutoff being one pass thru the loop premature, and the loose chip got caught and broke my last 1/16" carbide mill. So I am out of business with this stage of the project until I can get another 10 pack of them. I have about 20 of that size to make yet.
I'm wondering, since I haven't bought mills in quantity 10's in several months, who has the best price, and quality of edge mill, in that size range these days? It needs at least 1/4" of working cutter edge @ 1/16th diameter at the tip. Suggestions? Thanks Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Go from Idea to Many App Stores Faster with Intel(R) XDK Give your users amazing mobile app experiences with Intel(R) XDK. Use one codebase in this all-in-one HTML5 development environment. Design, debug & build mobile apps & 2D/3D high-impact games for multiple OSs. http://pubads.g.doubleclick.net/gampad/clk?id=254741911&iu=/4140 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
