Is it possible to use netmos9835 (1LPT/2Serial port) card to Linuxcnc? I would like to use it as a second port, but when I start the Linuxcnc program, the program gives failure after giving of I/O setup and portadress. For the Iscpci -v command I receive the following information: portadress 0x1110 and parport_serial kernel driver.
After starting Linuxcnc program in debug file information comes up the followings: Error: could not insert module /usr/realtime-3.4-9-rtai-686-pae/modules/linuxcnc/hal_parport.ko: Resource temporarily unavailable ./Maro.hal:6: exit value: 1 ./Maro.hal:6: insmod for hal_parport failed, returned -1 See the output of 'dmesg' for more information. 13995 PID TTY STAT TIME COMMAND Stopping realtime threads Unloading hal components and kernel message information: ... ... ... [ 2016.629223] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2394167000 hz. [ 2016.629225] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 2016.634189] RTAI[math]: loaded. [ 2016.786184] config string '0x378 out 0x1110 in' [ 2016.786199] PARPORT: ERROR: port parport0 claim failed [ 2019.147169] RTAI[math]: unloaded. [ 2019.148771] SCHED releases registered named ALIEN PEDV$D [ 2019.153483] RTAI[malloc]: unloaded. [ 2019.252049] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 2019.253738] I-pipe: head domain RTAI unregistered. [ 2019.253784] RTAI[hal]: unmounted. Regards, Csaba --- Ezt az e-mailt az Avast víruskereső szoftver átvizsgálta. https://www.avast.com/antivirus ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
