On 02/14/2016 04:10 AM, Horváth Csaba wrote: > Is it possible to use netmos9835 (1LPT/2Serial port) card to Linuxcnc? I > would like to use it as a second port, but when I start the Linuxcnc > program, the program gives failure after giving of I/O setup and portadress. > For the Iscpci -v command I receive the following information: > portadress 0x1110 and parport_serial kernel driver. > > > > [ 2016.786184] config string '0x378 out 0x1110 in' > > [ 2016.786199] PARPORT: ERROR: port parport0 claim failed > > I'm not an expert in this area, but it SEEMS this is indicating the error is on the FIRST parallel port, at addrerss 0x378, that's the motherboard port, not the PCI card port.
Jon ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users