If I only configured the first port, there is no failure. (First port on mainboard 0x378, I didn't take away the netmos9835 on the mainboard.)
sorry my bad english 2016. 02. 14. 17:53 keltezéssel, Jon Elson írta: > On 02/14/2016 04:10 AM, Horváth Csaba wrote: >> Is it possible to use netmos9835 (1LPT/2Serial port) card to Linuxcnc? I >> would like to use it as a second port, but when I start the Linuxcnc >> program, the program gives failure after giving of I/O setup and portadress. >> For the Iscpci -v command I receive the following information: >> portadress 0x1110 and parport_serial kernel driver. >> >> >> >> [ 2016.786184] config string '0x378 out 0x1110 in' >> >> [ 2016.786199] PARPORT: ERROR: port parport0 claim failed >> >> > I'm not an expert in this area, but it SEEMS this is > indicating the error is on the FIRST parallel port, at > addrerss 0x378, that's the motherboard port, not the PCI > card port. > > Jon > > ------------------------------------------------------------------------------ > Site24x7 APM Insight: Get Deep Visibility into Application Performance > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > Monitor end-to-end web transactions and take corrective actions now > Troubleshoot faster and improve end-user experience. Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Üdvözlettel/Mit freundlichen Grüssen/Best regards, Horváth Csaba Hódmezővásárhely Kohán György u. 7/c 1/3. 6800 HUNGARY Tel: +36 30 3970481 Skype: horcsab1270 --- Ezt az e-mailt az Avast víruskereső szoftver átvizsgálta. https://www.avast.com/antivirus ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
