Doesn't T0 M6 remove all tool offsets? JT
On 4/22/2016 4:16 AM, andy pugh wrote: > On 22 April 2016 at 01:02, Danny Miller <[email protected]> wrote: >> RS274NGC_STARTUP_CODE = G17 G20 G40 G49 G64 P0.001 G80 G90 G92 G94 G97 G98 >> >> Sure. And I do. But I don't train people to reboot LinuxCNC every time >> they start, and I don't plan to. > One useful addition to the system might be a "reset defaults" physical > button on the panel somewhere. That could be linked to an MDI_COMMAND > that resets all offsets etc. > > It could, possibly, run a routine to zero all the tool offsets too. > But that might take a bit of cunning as I think that G10 probably > errors if you try to set an offset for a tool not in the table. > ------------------------------------------------------------------------------ Find and fix application performance issues faster with Applications Manager Applications Manager provides deep performance insights into multiple tiers of your business applications. It resolves application problems quickly and reduces your MTTR. Get your free trial! https://ad.doubleclick.net/ddm/clk/302982198;130105516;z _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
