On 22 April 2016 at 05:15, Danny Miller <dan...@austin.rr.com> wrote: > So then- get this- we selected "linuxcnc ARC" instead, whose only > difference is supposed to be that circular arcs are made with G2/G3 arcs > instead of many linear points. Lo and behold, the G43.1 command did NOT > end up in the output file. Tried it several times. Wouldn't believe it > if I hadn't seen it.
Another possibility is a [FILTER] for incoming G-code files that removes the commands that you want to deprecate. This is probably more adaptable as you could set it up to not filter G-code files with an alternative file extension, but still run them. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 ------------------------------------------------------------------------------ Find and fix application performance issues faster with Applications Manager Applications Manager provides deep performance insights into multiple tiers of your business applications. It resolves application problems quickly and reduces your MTTR. Get your free trial! https://ad.doubleclick.net/ddm/clk/302982198;130105516;z _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users