nicklas, i use no spindle in sink edm tho an orienting axis 'C" on end of Z is common for me in non linuxcnc edm controls this is 'posing'
it can allow a shape to be cut around some centrum for example molds often use radial arrays of cavities to equalize flow pressure i use mcodes a lot to set edm parameters in generators (i sent you some examples, tho i do not know your hardware) in general, edm hole drilling abd edgrinding use rotating tools wedm does not sink edm does not ( generally ) wedm often uses cutter comp sink edm uses 'orbiting', a way to make the tool effectively larger orbiting is 'like' cutter comp but is around a centre, not off to one side of a path vector ( this motion accomodates the reduced overcut of lower power, which creates a larger cavity with a finer finish, with the 'disadvantage of larger outside corner radii [larger by a some microns]) orbiting relies on retracting/backingup, so is outside the normal motion fo linuxcnc hth tomp On 05/14/16 00:42, Nicklas Karlsson wrote: > It is possible to add things to user interface with glade interface designer > although I have not figured out how yet. There is also suitable m-codes to > adjust parameters for EDM generator. > > There is motion.spindle although in reality there are all kind of cutters. In > the long term although it is not very important since there are simple work > arounds I guess it would be good to think about what kind of cutters there > are and just "motion.spindle". > > Nicklas Karlsson > > >> Nicklas , >> whats needed for the edm interface , i'll dig into it if needed >> and probably design an easy addon for linuxcnc later. >> so Keep me in the loop. >> >> Sarah >> >> >> On 13 May 2016 at 13:52, Nicklas Karlsson <[email protected]> >> wrote: >> >>> I got measurement for EDM generator voltage an current into linuxcnc but >>> do now where to put them. >>> >>> User interface need to be modified. As is now there is now in motion >>> module there is motion.spindle while motion.edm is needed, any ideas? > ------------------------------------------------------------------------------ > Mobile security can be enabling, not merely restricting. Employees who > bring their own devices (BYOD) to work are irked by the imposition of MDM > restrictions. Mobile Device Manager Plus allows you to control only the > apps on BYO-devices by containerizing them, leaving personal data untouched! > https://ad.doubleclick.net/ddm/clk/304595813;131938128;j > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Mobile security can be enabling, not merely restricting. Employees who bring their own devices (BYOD) to work are irked by the imposition of MDM restrictions. Mobile Device Manager Plus allows you to control only the apps on BYO-devices by containerizing them, leaving personal data untouched! https://ad.doubleclick.net/ddm/clk/304595813;131938128;j _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
