Well I am saying motion http://linuxcnc.org/docs/html/man/man9/motion.9.html assume tool is always a spindle while in reality there others.
I have no idea if there any problems with this at any time but it does not reflect the reality. On Sat, 14 May 2016 23:56:24 +0800 Thomas Powderly <[email protected]> wrote: > nicklas if you are saying that the linixcnc tooltable is inadequate for edm > dont use it!i use a file with all the data i need, mpre than 20 > parameters per line > and read it and assign the value to hardware for each EDM pass > no need to be limited by the linuxcnc tool table. > most cnc programming after the fact is about finding ways to do what you > need done > not fighting limitations of previous formats > you're not spinning a cutter(mill) or spinning a workpiece(lathe), > so, dont expect linuxcnc to know/accomodate what you want > hth tomp tjtr33 > > i use pyvcp and glade to display my settings read from a file > inside a panel for linuxcnc > also to display live values read, like voltage and current > > On 05/14/16 00:42, Nicklas Karlsson wrote: > > It is possible to add things to user interface with glade interface > > designer although I have not figured out how yet. There is also suitable > > m-codes to adjust parameters for EDM generator. > > > > There is motion.spindle although in reality there are all kind of cutters. > > In the long term although it is not very important since there are simple > > work arounds I guess it would be good to think about what kind of cutters > > there are and just "motion.spindle". > > > > Nicklas Karlsson > > > > > >> Nicklas , > >> whats needed for the edm interface , i'll dig into it if needed > >> and probably design an easy addon for linuxcnc later. > >> so Keep me in the loop. > >> > >> Sarah > >> > >> > >> On 13 May 2016 at 13:52, Nicklas Karlsson <[email protected]> > >> wrote: > >> > >>> I got measurement for EDM generator voltage an current into linuxcnc but > >>> do now where to put them. > >>> > >>> User interface need to be modified. As is now there is now in motion > >>> module there is motion.spindle while motion.edm is needed, any ideas? > > ------------------------------------------------------------------------------ > > Mobile security can be enabling, not merely restricting. Employees who > > bring their own devices (BYOD) to work are irked by the imposition of MDM > > restrictions. Mobile Device Manager Plus allows you to control only the > > apps on BYO-devices by containerizing them, leaving personal data untouched! > > https://ad.doubleclick.net/ddm/clk/304595813;131938128;j > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------------ > Mobile security can be enabling, not merely restricting. Employees who > bring their own devices (BYOD) to work are irked by the imposition of MDM > restrictions. Mobile Device Manager Plus allows you to control only the > apps on BYO-devices by containerizing them, leaving personal data untouched! > https://ad.doubleclick.net/ddm/clk/304595813;131938128;j > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users -- Nicklas Karlsson <[email protected]> ------------------------------------------------------------------------------ Mobile security can be enabling, not merely restricting. Employees who bring their own devices (BYOD) to work are irked by the imposition of MDM restrictions. Mobile Device Manager Plus allows you to control only the apps on BYO-devices by containerizing them, leaving personal data untouched! https://ad.doubleclick.net/ddm/clk/304595813;131938128;j _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
