John, In this situation the plasma cutter unit is used on the CNC machine as well as as a manual hand cutter. So the clamp remains to be universal. It is trivial to switch between use on the CNC table or as a manual hand cutter, as long as you don't forget the ground clamp.
Jim On 5/19/2016 9:02 AM, John Kasunich wrote: > One question: Why do you have a ground "clamp". > > A CNC plasma is a more-or-less permanent installation. Put a lug on that > ground cable and bolt it to the machine table/frame. > > ------------------------------------------------------------------------------ Mobile security can be enabling, not merely restricting. Employees who bring their own devices (BYOD) to work are irked by the imposition of MDM restrictions. Mobile Device Manager Plus allows you to control only the apps on BYO-devices by containerizing them, leaving personal data untouched! https://ad.doubleclick.net/ddm/clk/304595813;131938128;j _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
