If you want to keep using the ground clamp as is.... I'd order two sets of parts from John... :-) You won't need them next week or two weeks from now.. Just as soon as the memory of this fades a bit.
Also, you will find out that how you put the clamp on the table will affect the plasma flame "direction". The plasma flame will point somewhat in the direction of the best ground. If you clip it on one leg and the other legs and supports are not well connected you will see the effects of the poor ground path in your cuts. The way you ground a plasma table is really important. Dave On 5/19/2016 11:35 AM, Jon Elson wrote: > On 05/19/2016 08:13 AM, Jim Craig wrote: >> Don't ever forget to hook up the ground to the plasma cutter! >> >> > One suggestion is to run an EXTRA ground cable from the > plasma power supply to the machine table. Not the base of > the frame, but the actual table the work sits on, if that > moves. This would prevent most of the damage if you ever > forget again (probably won't happen for a long while!) > > Jon > > ------------------------------------------------------------------------------ > Mobile security can be enabling, not merely restricting. Employees who > bring their own devices (BYOD) to work are irked by the imposition of MDM > restrictions. Mobile Device Manager Plus allows you to control only the > apps on BYO-devices by containerizing them, leaving personal data untouched! > https://ad.doubleclick.net/ddm/clk/304595813;131938128;j > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Mobile security can be enabling, not merely restricting. Employees who bring their own devices (BYOD) to work are irked by the imposition of MDM restrictions. Mobile Device Manager Plus allows you to control only the apps on BYO-devices by containerizing them, leaving personal data untouched! https://ad.doubleclick.net/ddm/clk/304595813;131938128;j _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
