Me is novice on EDM but it seems you know what you are doing. I got digital outputs connected on machine this weekend and will probably be able to test this weekend.
I have made my own servo drivers with interpolated position mode, response is fast even though I have not yet perfected control loop. I read thru books right now to get control loop as good as possible. If anyone else want interpolated position mode I could help modify linuxcnc protocol, modification is simple. On Mon, 2 Jan 2017 23:53:55 +0700 TJoseph Powderly <tjt...@gmail.com> wrote: > Hello > video of early iteration of edm panel in use > https://videobin.org/+fe8/jab.html > i think an example of reading the db file needs to be done soon > but a working model is better than just thinkin' > thanks > tomp tjtr33 > > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
