On 04/11/2017 03:10 AM, giorgio foga wrote: > I just setting the [TRAJ] and [AXIS] and [JOINT] section with the > right unit per second .... and axis gui work as I aspect ... ... > everything works well in axis gui, max-value is shown as I expect. > The problem is only when I want to use the commands > halui.max-velocity.scale / increase / decrease .... at this point the > value immediately goes to 60.0 ... and then if I use increase / > decrease change correctly but never beyond the 60.0 .... at this > point i try to move the slider axis gui and everything returns to be > shown properly. I used google translate in hopes of being lighter. > [😅] .... any how I control again my setting.
What exact version of LinuxCNC are you using? Is this the old ja14 system you mentioned in another thread? If so, and if an upgrade from ja14 to the current master branch (v2.8.0-pre1-2975-gc0778d66cf or there abouts) doesn't fix this issue, please post your ini file somewhere so we can look at it. -- Sebastian Kuzminsky ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
