On 04/21/2017 10:21 AM, giorgio foga wrote: > Dear Kuzminsky, > > sorry for the late reply ... no there are JA9 ... the file ini.txt for > observe it .... joint1-2 and axis 1-2 is equal than joint 0 and axis 0 ... > > I see nothings to particular ... so a suggest in witch emc file I try to > observe and study for modify and solve there are a good things.....
My advise is still the same: JA9 is very old, and many bugs have been fixed since then. Upgrade your machine to a newer version of the master branch and try again. If the bug is still there we'll try to fix it. > Da: Sebastian Kuzminsky <s...@highlab.com> > Inviato: martedì 11 aprile 2017 20.54 > A: Enhanced Machine Controller (EMC) > Oggetto: Re: [Emc-users] halui.max-velocity ... > > On 04/11/2017 03:10 AM, giorgio foga wrote: >> I just setting the [TRAJ] and [AXIS] and [JOINT] section with the >> right unit per second .... and axis gui work as I aspect ... ... >> everything works well in axis gui, max-value is shown as I expect. >> The problem is only when I want to use the commands >> halui.max-velocity.scale / increase / decrease .... at this point the >> value immediately goes to 60.0 ... and then if I use increase / >> decrease change correctly but never beyond the 60.0 .... at this >> point i try to move the slider axis gui and everything returns to be >> shown properly. I used google translate in hopes of being lighter. >> [😅] .... any how I control again my setting. > > What exact version of LinuxCNC are you using? > > Is this the old ja14 system you mentioned in another thread? If so, and > if an upgrade from ja14 to the current master branch > (v2.8.0-pre1-2975-gc0778d66cf or there abouts) doesn't fix this issue, > please post your ini file somewhere so we can look at it. -- Sebastian Kuzminsky ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
