> On 16 Oct 2017, at 18:31, Dave Cole <[email protected]> wrote: > > That is not normally done on a CNC lathe even if you are doing feed per rev.
Indeed. In feed-per-rev mode LinuxCNC used the spindle velocity feedback rather than position. I did have a spindle that lost track below max revs for a while and never really noticed any problem with FPR. ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
