Is there a problem with the version of RTAI on the Wheezy ISO which prevents it from working right on a system with an ISA card(s)?
I have tried several times to install one of the newer Linuxcnc ISOs on an older system that has been running Linuxcnc on Ubuntu 10.04 for years. The Wheezy iso seems to install ok until you try to open Linuxcnc (or start any real time process.) -- ======================================== Todd Zuercher mailto:zuerc...@embarqmail.com ======================================== ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users