It isn't the reliability of Linuxcnc that is in question we already have several machines running it. It is the down time for the conversion. The old system is still working, but it's PC is showing signs of its age, (bad CMOS battery, flaky booting, pending HD failure...) Buying a new Wincnc PC with the current Wincnc version and Windows 10, appeals to them (and our IT guy who isn't a Linux guy). And should just be plug and play, not to mention supported by the OEM who is setting up and sending us the new PC.
Todd Zuercher P. Graham Dunn Inc. 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 -----Original Message----- From: andrew beck <andrewbeck0...@gmail.com> Sent: Saturday, October 12, 2019 12:12 AM To: Enhanced Machine Controller (EMC) <emc-users@lists.sourceforge.net> Subject: Re: [Emc-users] Mesa Card Suggestions That's a pretty good record! On Sat, Oct 12, 2019, 3:24 PM Jon Elson <el...@pico-systems.com> wrote: > On 10/11/2019 02:56 PM, Todd Zuercher wrote: > > Thanks Jon, > > > > >From the sound of if, the powers that be are not going to let me > convert this machine to Linuxcnc. They want to buy a new Wincnc PC. > (The machine operators and myself would rather switch it over.) Oh well. > > > > > Well, you can tell them that I've been using EMC/EMC2/LinuxCNC since > 1998, and it has not crashed EVER in that whole time. If that doesn't > convince them, then I guess that is what will happen. > > Jon > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users