On Sun, 15 Dec 2019, Leonardo Marsaglia wrote:
Date: Sun, 15 Dec 2019 22:45:23 -0300
From: Leonardo Marsaglia <ldmarsag...@gmail.com>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net>
Subject: Re: [Emc-users] 6i24 + 7i44 configuration
By the way, I'm using the 6i24-25 board and I'm using LinuxCNC 2.7.14 on
Debian 7 Wheezy as it comes with the .iso file.
Pretty sure theres a bitfile for a 7I47 and 7I44 but I dont think theres one
with a 7I33 also, Ill try to make one up sometime tommorow
El dom., 15 dic. 2019 a las 22:29, Leonardo Marsaglia (<
ldmarsag...@gmail.com>) escribi??:
Hello again.
I'm testing my boards and configuration before I install everything on the
real machine.
I'm configuring a lathe with 2 servos for the X and Z axis, one PWM
converted to analog for the spindle, and one encoder input for the spindle.
Also a lot of input and outputs to deal with.
For that I purchased a 6i24 with a 7i44 to drive one 7i70 and a 7i71 for
inputs and outputs. In adition to that I originally planned to use a 7i33
to drive the servos and spindle with analog voltage and also read the
encoders coupled to the screws and the one on the spindle.
I changed my mind and I plan to use step + dir to drive the servos and
leave the rest as it was originally planned. So I guess I need another
daughter card to drive the servos via step + dir.
From what I read the ideal board would be the 7i47 but I needed to ask
here first. Also I'm having a little bit of trouble finding the right
firmware for this kind of setup.
To sum up:
---- 7i70 ---->Relays
/
----> 7i44 -----> 7i71 <-----Sensors, buttons, etc...
/
6i24 ----> 7i33 <----> Spindle analog out/ Spindle encoder in
\
----> 7i47 ----> Servos step+dir output
Please let me know if this is the right approach and also guide to find
the right firmware because I'm not sure wich one I can use.
Thanks as always and sorry for the long post.
Leonardo
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
