Thank you very much Peter, that would be really helpful. El dom., 15 dic. 2019 a las 22:57, Peter C. Wallace (<p...@mesanet.com>) escribió:
> On Sun, 15 Dec 2019, Leonardo Marsaglia wrote: > > > Date: Sun, 15 Dec 2019 22:45:23 -0300 > > From: Leonardo Marsaglia <ldmarsag...@gmail.com> > > Reply-To: "Enhanced Machine Controller (EMC)" > > <emc-users@lists.sourceforge.net> > > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net > > > > Subject: Re: [Emc-users] 6i24 + 7i44 configuration > > > > By the way, I'm using the 6i24-25 board and I'm using LinuxCNC 2.7.14 on > Debian 7 Wheezy as it comes with the .iso file. > > Pretty sure theres a bitfile for a 7I47 and 7I44 but I dont think theres > one > with a 7I33 also, Ill try to make one up sometime tommorow > > > El dom., 15 dic. 2019 a las 22:29, Leonardo Marsaglia (< > ldmarsag...@gmail.com>) escribiяя: > > > Hello again. > > > > I'm testing my boards and configuration before I install everything on > the > > real machine. > > > > I'm configuring a lathe with 2 servos for the X and Z axis, one PWM > > converted to analog for the spindle, and one encoder input for the > spindle. > > Also a lot of input and outputs to deal with. > > > > For that I purchased a 6i24 with a 7i44 to drive one 7i70 and a 7i71 for > > inputs and outputs. In adition to that I originally planned to use a 7i33 > > to drive the servos and spindle with analog voltage and also read the > > encoders coupled to the screws and the one on the spindle. > > > > I changed my mind and I plan to use step + dir to drive the servos and > > leave the rest as it was originally planned. So I guess I need another > > daughter card to drive the servos via step + dir. > > > > From what I read the ideal board would be the 7i47 but I needed to ask > > here first. Also I'm having a little bit of trouble finding the right > > firmware for this kind of setup. > > > > To sum up: > > ---- 7i70 ---->Relays > > / > > ----> 7i44 -----> 7i71 <-----Sensors, buttons, etc... > > / > > 6i24 ----> 7i33 <----> Spindle analog out/ Spindle encoder in > > \ > > ----> 7i47 ----> Servos step+dir output > > > > > > Please let me know if this is the right approach and also guide to find > > the right firmware because I'm not sure wich one I can use. > > > > Thanks as always and sorry for the long post. > > > > Leonardo > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > Peter Wallace > Mesa Electronics > > (\__/) > (='.'=) This is Bunny. Copy and paste bunny into your > (")_(") signature to help him gain world domination. > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
