Correct Todd..One is a Milacron 850SX and the Okuma has a Numatix control someone retrofitted before I got it.
I think maybe some of the machines he wants to use it on might not be running Linuxcnc. Todd Zuercher P. Graham Dunn Inc. 630 Henry Street? Dalton, Ohio 44618 Phone:? (330)828-2105ext. 2031 -----Original Message----- From: Andy Pugh <[email protected] <mailto:[email protected]> > Sent: Thursday, February 20, 2020 10:24 AM To: Enhanced Machine Controller (EMC) <[email protected] <mailto:[email protected]> > Subject: Re: [Emc-users] Rotary Head [EXTERNAL EMAIL] Be sure links are safe. > On 20 Feb 2020, at 14:25, Jeff Johnson <[email protected] <mailto:[email protected]> > wrote: > > > Any thoughts or ideas on the best way to pull this off? PC? RPi4? Which Why not add a 4th axis configuration to each machine that might use it? Then you can properly integrate the motion control? You can actually do it with a single config. I have a jumper in one of the connectors that the rotary connects through. If the system doesn?t see the link (via an IO pin) it doesn?t enable the axis. Mine actually f-errors if you try to move the axis, but that would be easy to fix. Jeff Johnson [email protected] Superior Roll & Turning 734-279-1831 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
