> > Wheezy is pretty ancient now. > You could try the preempt-rt and rtai ISOs built on Mint here: > > https://forum.linuxcnc.org/9-installing-linuxcnc/38308-linux-mint-iso-with-rtai-and-rt?start=0
I tried with Mint and then LCNC last night Andy, but the latency test went crazy as soon as I opened Firefox. I went back to Wheezy for now and I'll continue testing some other distro to upgrade it later. The good thing is all the boards are working fine. I only need to test the 7i52s with the servo motors and I'm ready to switch the control of the lathe. El dom., 8 mar. 2020 a las 13:18, andy pugh (<bodge...@gmail.com>) escribió: > On Sun, 8 Mar 2020 at 02:29, Leonardo Marsaglia <ldmarsag...@gmail.com> > wrote: > > > I had really high jitter when I run latency test with Debian Stretch. So > I > > installed Wheezy with LinuxCNC 2.7.14 > > Wheezy is pretty ancient now. > You could try the preempt-rt and rtai ISOs built on Mint here: > > https://forum.linuxcnc.org/9-installing-linuxcnc/38308-linux-mint-iso-with-rtai-and-rt?start=0 > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
