On 5/3/20 12:11 PM, Peter C. Wallace wrote:
The easiest way I know to capture error messages (with the uspace
version of LinuxCNC you are running) is to start linuxcnc from the
command line. All error
messages will be logged on the console which _can_ be copy-pasted
Well, that worked! Enclosed is the message. Looks to my unpracticed
eye to be a network error. Suggestions?
ed@debian:~$ linuxcnc /home/ed/linuxcnc/configs/3-axis/3-axis.ini
LINUXCNC - 2.7.14
Machine configuration directory is '/home/ed/linuxcnc/configs/3-axis'
Machine configuration file is '3-axis.ini'
Starting LinuxCNC...
Found file(REL): ./3-axis.hal
Note: Using POSIX realtime
hm2: loading Mesa HostMot2 driver version 0.15
hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2
hm2_eth: 192.168.1.121: Hardware address: 00:60:1b:11:81:19
hm2_eth: discovered 7I80HD-16
hm2/hm2_7i80.0: Smart Serial Firmware Version 43
hm2/hm2_7i80.0: 72 I/O Pins used:
hm2/hm2_7i80.0: IO Pin 000 (P1-01): PWMGen #0, pin Not-Enable (Output)
hm2/hm2_7i80.0: IO Pin 001 (P1-03): Muxed Encoder #0, pin Muxed A
(Input)
hm2/hm2_7i80.0: IO Pin 002 (P1-05): Muxed Encoder #0, pin Muxed B
(Input)
hm2/hm2_7i80.0: IO Pin 003 (P1-07): Muxed Encoder #0, pin Muxed
Index (Input)
hm2/hm2_7i80.0: IO Pin 004 (P1-09): Muxed Encoder #1, pin Muxed A
(Input)
hm2/hm2_7i80.0: IO Pin 005 (P1-11): Muxed Encoder #1, pin Muxed B
(Input)
hm2/hm2_7i80.0: IO Pin 006 (P1-13): Muxed Encoder #1, pin Muxed
Index (Input)
hm2/hm2_7i80.0: IO Pin 007 (P1-15): IOPort
hm2/hm2_7i80.0: IO Pin 008 (P1-17): IOPort
hm2/hm2_7i80.0: IO Pin 009 (P1-19): IOPort
hm2/hm2_7i80.0: IO Pin 010 (P1-21): Muxed Encoder Select #0, pin Mux
Select 0 (Output)
hm2/hm2_7i80.0: IO Pin 011 (P1-23): PWMGen #0, pin Out0 (PWM or Up)
(Output)
hm2/hm2_7i80.0: IO Pin 012 (P1-25): PWMGen #0, pin Out1 (Dir or
Down) (Output)
hm2/hm2_7i80.0: IO Pin 013 (P1-27): PWMGen #1, pin Out0 (PWM or Up)
(Output)
hm2/hm2_7i80.0: IO Pin 014 (P1-29): PWMGen #1, pin Out1 (Dir or
Down) (Output)
hm2/hm2_7i80.0: IO Pin 015 (P1-31): PWMGen #2, pin Out0 (PWM or Up)
(Output)
hm2/hm2_7i80.0: IO Pin 016 (P1-33): PWMGen #2, pin Out1 (Dir or
Down) (Output)
hm2/hm2_7i80.0: IO Pin 017 (P1-35): IOPort
hm2/hm2_7i80.0: IO Pin 018 (P1-37): IOPort
hm2/hm2_7i80.0: IO Pin 019 (P1-39): IOPort
hm2/hm2_7i80.0: IO Pin 020 (P1-41): IOPort
hm2/hm2_7i80.0: IO Pin 021 (P1-43): IOPort
hm2/hm2_7i80.0: IO Pin 022 (P1-45): IOPort
hm2/hm2_7i80.0: IO Pin 023 (P1-47): PWMGen #0, pin Not-Enable (Output)
hm2/hm2_7i80.0: IO Pin 024 (P2-01): IOPort
hm2/hm2_7i80.0: IO Pin 025 (P2-03): IOPort
hm2/hm2_7i80.0: IO Pin 026 (P2-05): IOPort
hm2/hm2_7i80.0: IO Pin 027 (P2-07): IOPort
hm2/hm2_7i80.0: IO Pin 028 (P2-09): IOPort
hm2/hm2_7i80.0: IO Pin 029 (P2-11): IOPort
hm2/hm2_7i80.0: IO Pin 030 (P2-13): IOPort
hm2/hm2_7i80.0: IO Pin 031 (P2-15): IOPort
hm2/hm2_7i80.0: IO Pin 032 (P2-17): IOPort
hm2/hm2_7i80.0: IO Pin 033 (P2-19): IOPort
hm2/hm2_7i80.0: IO Pin 034 (P2-21): IOPort
hm2/hm2_7i80.0: IO Pin 035 (P2-23): IOPort
hm2/hm2_7i80.0: IO Pin 036 (P2-25): IOPort
hm2/hm2_7i80.0: IO Pin 037 (P2-27): IOPort
hm2/hm2_7i80.0: IO Pin 038 (P2-29): IOPort
hm2/hm2_7i80.0: IO Pin 039 (P2-31): IOPort
hm2/hm2_7i80.0: IO Pin 040 (P2-33): IOPort
hm2/hm2_7i80.0: IO Pin 041 (P2-35): IOPort
hm2/hm2_7i80.0: IO Pin 042 (P2-37): IOPort
hm2/hm2_7i80.0: IO Pin 043 (P2-39): IOPort
hm2/hm2_7i80.0: IO Pin 044 (P2-41): IOPort
hm2/hm2_7i80.0: IO Pin 045 (P2-43): IOPort
hm2/hm2_7i80.0: IO Pin 046 (P2-45): IOPort
hm2/hm2_7i80.0: IO Pin 047 (P2-47): IOPort
hm2/hm2_7i80.0: IO Pin 048 (P3-01): IOPort
hm2/hm2_7i80.0: IO Pin 049 (P3-03): IOPort
hm2/hm2_7i80.0: IO Pin 050 (P3-05): IOPort
hm2/hm2_7i80.0: IO Pin 051 (P3-07): IOPort
hm2/hm2_7i80.0: IO Pin 052 (P3-09): IOPort
hm2/hm2_7i80.0: IO Pin 053 (P3-11): IOPort
hm2/hm2_7i80.0: IO Pin 054 (P3-13): IOPort
hm2/hm2_7i80.0: IO Pin 055 (P3-15): IOPort
hm2/hm2_7i80.0: IO Pin 056 (P3-17): IOPort
hm2/hm2_7i80.0: IO Pin 057 (P3-19): IOPort
hm2/hm2_7i80.0: IO Pin 058 (P3-21): IOPort
hm2/hm2_7i80.0: IO Pin 059 (P3-23): IOPort
hm2/hm2_7i80.0: IO Pin 060 (P3-25): IOPort
hm2/hm2_7i80.0: IO Pin 061 (P3-27): IOPort
hm2/hm2_7i80.0: IO Pin 062 (P3-29): IOPort
hm2/hm2_7i80.0: IO Pin 063 (P3-31): IOPort
hm2/hm2_7i80.0: IO Pin 064 (P3-33): IOPort
hm2/hm2_7i80.0: IO Pin 065 (P3-35): IOPort
hm2/hm2_7i80.0: IO Pin 066 (P3-37): IOPort
hm2/hm2_7i80.0: IO Pin 067 (P3-39): IOPort
hm2/hm2_7i80.0: IO Pin 068 (P3-41): IOPort
hm2/hm2_7i80.0: IO Pin 069 (P3-43): IOPort
hm2/hm2_7i80.0: IO Pin 070 (P3-45): IOPort
hm2/hm2_7i80.0: IO Pin 071 (P3-47): IOPort
hm2/hm2_7i80.0: registered
sysctl: cannot stat /proc/sys/net/ipv6/conf/eth0:avahi/disable_ipv6: No
such file or directory
hm2_eth: ERROR: Failed to execute '/sbin/sysctl -q
net.ipv6.conf.eth0:avahi.disable_ipv6=1'
./3-axis.hal:9: parameter or pin 'hm2_7i80HD.0.pwmgen.pwm_frequency' not
found
Shutting down and cleaning up LinuxCNC...
Running HAL shutdown script
hm2_eth: HostMot2 ethernet driver unloaded
hm2: unloading
Note: Using POSIX realtime
LinuxCNC terminated with an error. You can find more information in the
log:
/home/ed/linuxcnc_debug.txt
and
/home/ed/linuxcnc_print.txt
as well as in the output of the shell command 'dmesg' and in the terminal
ed@debian:~$
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
