Have you seen this DIY Handwheel projekt? https://www.youtube.com/watch?v=Y1_VYIPNtuk&t=629s
André Am Mo., 8. Juni 2020 um 17:54 Uhr schrieb Jon Elson <el...@pico-systems.com >: > On 06/07/2020 10:59 PM, Chris Albertson wrote: > > *One question: Does a pendant need a "activate" button* on the side > such > > that the controls are disabled if you don't hold the button down. You > > don't want to jog a mill by accident if the wheel is bumped. > YES !!! I have mine set up that way. Make sure the button > can be held by your index finger while your thumb can turn > the skirt on the MPG dial, this allows one-hand jogging to > touch-off. > > On this picture, the button at the lower left is the jog > enable, the one above it is a momentary E-stop. > http://pico-systems.com/images/mmpendant.jpg > > > Jon > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
