No, I had not seen this one. I like the shape of the case I might use parts of the case profile. This looks like it might fit the hand well. He also had a great idea to design the case so that it can be mirrored for left or right-handed use.
The 20 characters wide display would not fit but the part with the jog wheel and "deadman" jog enable button are usable. He has some good ideas to borrow. This pendant seems to depend on a Mesa card that can connect to RS442 and on Smart Serial. I see the builder has a link to JLPCB. These guys will make first rate quality PCBs for $2 each. It is a real game-changer for hobby electrics. I'd like to build a real-time interface card that works for LinuxCNC and ROS that an end-user could have for under $30. On Mon, Jun 8, 2020 at 10:04 AM André Meier <dreme...@gmail.com> wrote: > Have you seen this DIY Handwheel projekt? > https://www.youtube.com/watch?v=Y1_VYIPNtuk&t=629s > > André > > > Am Mo., 8. Juni 2020 um 17:54 Uhr schrieb Jon Elson < > el...@pico-systems.com > >: > > > On 06/07/2020 10:59 PM, Chris Albertson wrote: > > > *One question: Does a pendant need a "activate" button* on the side > > such > > > that the controls are disabled if you don't hold the button down. You > > > don't want to jog a mill by accident if the wheel is bumped. > > YES !!! I have mine set up that way. Make sure the button > > can be held by your index finger while your thumb can turn > > the skirt on the MPG dial, this allows one-hand jogging to > > touch-off. > > > > On this picture, the button at the lower left is the jog > > enable, the one above it is a momentary E-stop. > > http://pico-systems.com/images/mmpendant.jpg > > > > > > Jon > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Chris Albertson Redondo Beach, California _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
