I actually read something about how to do that, but one would need a
plugin for the path workbench, and read is was not that reliable?
I did play with rotating parts etc in freecad
On 9/16/20 4:42 AM, N wrote:
Hello,
I have been using freecad for designing parts, and then milling them on
a sherline mill, getting the hang of that a little bit.
I have a lathe too, that works with CNC linux, but noticed heard, that
you can't really make parts, or g-codes, with it for a lathe.
Also used Freecad a little bit. Suspect rotating a sketch is a good or very
good method to draw parts for a lathe. Do know anything about how CAM, the path
workbench will work a lathe but should be simple to try.
As someone pointed out Fusion 360 might be better but CAD software usually also
tend to be rather expensive.
Regards Nicklas Karlsson
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users