On 9/16/20 1:15 PM, Chris Albertson wrote:
No. I don't know of any CAM software for generating toolpaths for
lathes that runs on Linux.
The best 3D CAD that runs on Linux is https://www.onshape.com/. But unlike
Fusion360, Onshape does not have the ability to generate toolpaths unless
you get some 3rd party add-in software.
I have two computers here. An iMac for most things and a Linux based
16-core Xeon PC with nVidia GPU for robotics software development. Onshape
on the Xeon is 10X faster than Fusion on my older iMac But I've not
figured out a good way to translate the Onshape models to g-code.
Gene suggests wring g-code by hand but that simply can't be done for
complex parts and even if one could do this there is no "proof" that
g-code I write is the same as what I designed in the CAD system.
I have a few dual cpu xeon machines, with 384Gb ram, but not ideal to
run VMs. I use disk trays, so I could just use one of them to install
windows on it, but I hate windows, especially win10
One solution is running a virtual machine on the Linux PC, installing
Windows 10 on that and then Fusion360. But this requires a rarely
powerful Linux PC.
(At least as a minimum, a 4-core i7 with 16GB RAM and SSD.)
I've been a Linux user (both professional and at home) for a long time and
before Linux existed, BSD UNIX and Solaris but then one day I wanted to
edit video and process images shot with an SLR. Adobe is the only game in
town for professional-level media editing unless you consider Apple's Final
Cut Pro X. None of this runs on Linux.
I have been doing *Nix for 30 some odd years, and work in HPC since a
while.. we do A LOT of image processing, make movies etc
on Linux clusters but that's not a home solution, not even for B. Gates.
On my linux boxes at home I use Gimp, but I am not relly into graphics
editing though.
On Tue, Sep 15, 2020 at 11:38 PM R C <cjv...@gmail.com> wrote:
On 9/16/20 12:09 AM, Chris Albertson wrote:
Fusion 360 can generate g-code for mills and lathes. It's free even for
commercial use until you make $50K using it.
Fusion is a little bit like Freecad but is more complete and better
supported as you would expect of a product from Autodesk.
I have heard about that one. does it run on Linux too?
On Tue, Sep 15, 2020 at 9:39 PM R C <cjv...@gmail.com> wrote:
Hello,
I have been using freecad for designing parts, and then milling them on
a sherline mill, getting the hang of that a little bit.
I have a lathe too, that works with CNC linux, but noticed heard, that
you can't really make parts, or g-codes, with it for a lathe.
What wold be a good choice for designing, simple, parts for a lathe,
that will create g-code for it?
thanks,
Ron
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
