There's always the less functional https://www.alibre.com/atom3d/ If can export step and stl files. You pay for it and use it off line. Less than $200.
> -----Original Message----- > From: Chris Albertson [mailto:[email protected]] > Sent: September-17-20 5:04 PM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] CAD for parts to make on a lathe > > Fusion360 just made changes that in my opinion kill the product for > personal use. You can not save your work locally as a STEP file after > October 1, 2020. So download your stuff now. > > OnShape and Solidworks look like good options. > > Solidworks is used for thinks like rocket engine design at SpaceX and for > building cars at GM. You are not going to outgrow it but may not need it > either. OnShape does not have native CAM. I assume people on the LCNC > list want CAM. > > One opinion is to just pay for Fusion360. It is on sale now for about $270 > but will go back to $495/yr at some point. > > What is REALLY needed is a good open source CAM system that accepts .STEP > files from any CAD system. > > > > On Thu, Sep 17, 2020 at 4:28 PM hubert <[email protected]> wrote: > > > > > On 9/17/20 11:30 AM, dave engvall wrote: > > > Chris, > > > You might try Synergy, does the whole ball of wax. Not too expensive. > > > Takes time to learn. Parasolids based. 2D, 2.5D, 3D, wireframe, > > > solids, turning and probably something i missed. Unusual feature is > > > extrusion screws. > > > Runs on linux; will run on Windows but you lose a few features. Has a > > > 30 day free demo. > > > https://www.webersys.com/ > > > > > I used to use Synergy but changed to Fusion 360. I talked to Bob at > > Weber Systems today and it is now down to just Him. While still > > supports current customers he is encouraging those who need other > > features to look elsewhere. He lost his Longtime cohort Larry a couple > > or years ago but he is now retirement age. It was a long time UNIX > > product but hasn't transitioned to 64 bit. He is running it under > > Ubuntu 16.04 but had trouble with 18. I don't know if he would be > > interested in passing the product on, but he hasn't updated since 2015. > > > As far a photoshop; gimp is pretty good but maybe not so easy to learn. > > > > > > YMMV > > > > > > Dave > > > > > > On 9/16/20 12:15 PM, Chris Albertson wrote: > > >> No. I don't know of any CAM software for generating toolpaths for > > >> lathes that runs on Linux. > > >> > > >> The best 3D CAD that runs on Linux is https://www.onshape.com/. But > > >> unlike > > >> Fusion360, Onshape does not have the ability to generate toolpaths > > >> unless > > >> you get some 3rd party add-in software. > > >> > > >> I have two computers here. An iMac for most things and a Linux based > > >> 16-core Xeon PC with nVidia GPU for robotics software development. > > >> Onshape > > >> on the Xeon is 10X faster than Fusion on my older iMac But I've not > > >> figured out a good way to translate the Onshape models to g-code. > > >> > > >> Gene suggests wring g-code by hand but that simply can't be done for > > >> complex parts and even if one could do this there is no "proof" that > > >> g-code I write is the same as what I designed in the CAD system. > > >> > > >> One solution is running a virtual machine on the Linux PC, installing > > >> Windows 10 on that and then Fusion360. But this requires a rarely > > >> powerful Linux PC. > > >> (At least as a minimum, a 4-core i7 with 16GB RAM and SSD.) > > >> > > >> I've been a Linux user (both professional and at home) for a long > > >> time and > > >> before Linux existed, BSD UNIX and Solaris but then one day I wanted to > > >> edit video and process images shot with an SLR. Adobe is the only > > >> game in > > >> town for professional-level media editing unless you consider Apple's > > >> Final > > >> Cut Pro X. None of this runs on Linux. > > >> > > >> > > >> On Tue, Sep 15, 2020 at 11:38 PM R C <[email protected]> wrote: > > >> > > >>> On 9/16/20 12:09 AM, Chris Albertson wrote: > > >>>> Fusion 360 can generate g-code for mills and lathes. It's free > > >>>> even for > > >>>> commercial use until you make $50K using it. > > >>>> > > >>>> Fusion is a little bit like Freecad but is more complete and better > > >>>> supported as you would expect of a product from Autodesk. > > >>>> > > >>> I have heard about that one. does it run on Linux too? > > >>> > > >>> > > >>>> > > >>>> On Tue, Sep 15, 2020 at 9:39 PM R C <[email protected]> wrote: > > >>>> > > >>>>> Hello, > > >>>>> > > >>>>> > > >>>>> I have been using freecad for designing parts, and then milling > > >>>>> them on > > >>>>> a sherline mill, getting the hang of that a little bit. > > >>>>> > > >>>>> > > >>>>> I have a lathe too, that works with CNC linux, but noticed heard, > > >>>>> that > > >>>>> you can't really make parts, or g-codes, with it for a lathe. > > >>>>> > > >>>>> > > >>>>> What wold be a good choice for designing, simple, parts for a lathe, > > >>>>> that will create g-code for it? > > >>>>> > > >>>>> > > >>>>> thanks, > > >>>>> > > >>>>> > > >>>>> Ron > > >>>>> > > >>>>> > > >>>>> > > >>>>> _______________________________________________ > > >>>>> Emc-users mailing list > > >>>>> [email protected] > > >>>>> https://lists.sourceforge.net/lists/listinfo/emc-users > > >>>>> > > >>> > > >>> _______________________________________________ > > >>> Emc-users mailing list > > >>> [email protected] > > >>> https://lists.sourceforge.net/lists/listinfo/emc-users > > >>> > > >> > > > > > > > > > > > > _______________________________________________ > > > Emc-users mailing list > > > [email protected] > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > -- > > Chris Albertson > Redondo Beach, California > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
