On Wed, 21 Oct 2020, Gene Heskett wrote:
Date: Wed, 21 Oct 2020 17:06:10 -0400
From: Gene Heskett <[email protected]>
Reply-To: "Enhanced Machine Controller (EMC)"
<[email protected]>
To: [email protected]
Subject: Re: [Emc-users] mesaflash problem, Peter plz comment
Greetings;
I have now written the 5i25_7i76_7i78.bit file to 3 different 5i25's, the
one that has been in the machine for several years, and 2 of the 3 Peter
sent me in about 2015.
none of them will admit there is a pwmgen feeding P3, all show the first
one feeding p2. But there are 2 listed in the corresponding .pin file,
and with the 5i25_7i76_1px2d.bit file installed, the first one replaces
stepgen #4 on p3. But with that firmware, I have no pwmgen.01.dir on p2.
There would normally not be a PWMGen on a 7I76 interface
Except for specific firmware that replaces the stepgen with a PWMGen
Like the 5i25_7i76_1px2d.bit. The 7I78 will always have a PWMGen for
its spindle interface.
I have a 5i25, with a 7i76D on p3. and a std bob on p2.
What do I do next besides fix dinner and take a nap? Wake up and see if I
can make the 420 watt audio amp work.
Thanks.
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/gene>
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
