On Mon, 9 Nov 2020 at 04:37, R C <cjv...@gmail.com> wrote: > when I home the X axis (with either option) , from a "random position" > (where the cross slide was left before I turned everything off for > example) It goes towards home, hits the switch, reverses and backs > off (slowly) a little and then reverses again and 'crashes' into the > switch/Z-axis. (if it wouldn't do the latter it'd be perfect.)
That last move is the rapid-to-home that finishes the sequence. So it looks like your HOME_POSITION is incompatible with the rest of the numbers. This page might help with understanding what the numbers mean: http://linuxcnc.org/docs/2.8/html/config/ini-homing.html -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users