Marcus, Jon Elson (Pico-systems) sells the Cramps board designed by Charles Steinkuehler that can run six Pololu stepper drives (like 35v 1 to 2 amps). I designed a little PCB that can plug into three of the stepper driver sockets to allow it to control 3 external drives. They are or were available on OSHPark as CRAMPS-BOB3-a3.
Alan > From: [email protected] > To: EnhancedController <[email protected]> > Cc: > Bcc: > Date: Sat, 12 Dec 2020 19:38:12 +0000 > Subject: [Emc-users] Beaglebone and MachineKit > John (or anyone else), > > Is there a 'cape' currently available to suit the Beaglebone Black > running MachineKit or LinuxCNC? > I know there used to be a cape specifically for that purpose, but it has > been out of production for some time. > I have a Beaglebone I would like to press into service running either > LinuxCNC or MachineKit. > Are images available for both? > > Marcus > > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
